Wiring Specialties LS1 / LS6 O2 Sensor (Oxygen) Connector (Harness Side)

Description

LS1 LS6 O2 Sensor Connector (Connector Side) Connector is available as: Pigtail – Fully assembled with 3 inches of wire. Select this if you want to attach bare wire to bare wire. Housing – Only the plastic housing parts. Select this if you want to swap over the pinned wires from a damaged housing to a new housing. Parts – Not assembled, comes with housing, crimp-on wire terminals and wire seals.  Select this if you want to crimp new pins on and then assemble the connector.