Description
The simple-to-operate boost controller “EVC-S2” has evolved into a color LCD with excellent visibility.
Features
– The display area is doubled compared to the previous EVC-S. Color display is also possible, greatly improving visibility.
– A variety of displays that utilize dot displays enable intuitive operation and improve operability.
– Displays the function of each button during setup (button information display) and supports modification operations.
– Boost settings have been expanded from the previous 2 modes to 4 modes (Modes A to D). We have made it easy to select a boost according to the conditions and conditions.
– New features include circuit mode and scramble mode. Control by switching between two of the four boost settings. (Scramble mode is switched according to the set time)
– Added overtime setting to warning function. Warning control will not start unless the warning value has exceeded the set time, so the range of adjustment for warning control has been expanded.
– The maximum control boost is 250kPa and supports a wide range of boost control.
– Inheriting the control logic of the EVC-S, which has excellent boost control, and expanding the range of settings by adding a sampling time setting.
Main features
– 4 boost setting function
– Scramble function
– Peak memory selection function
– Button information function
– Button position left/right reversal function
– Boost setting switching function (circuit mode)
– Warning function
– After image function
– Data memory function
– Backlight brightness adjustment function
– Normal return function
– Data lock function
– Pressure unit selection function
Feature Description
Scramble function (scramble mode)
– When you press the button in scramble mode, the boost mode selected immediately before entering scramble mode and the boost mode set in the scramble settings will switch for a set time (maximum 60 seconds). Scrambling starts when you press and hold the bottom button.
Boost setting switching function (circuit mode)
– Circuit mode can be used when scramble control is set to OFF. When you press the button in circuit mode, the boost mode selected just before entering circuit mode and the boost mode set in the scramble settings will alternate. Boost mode is switched by button operation other than long pressing the bottom button.
Warning function
– If the boost continues to exceed the warning value for more than the overtime period, the system enters warning mode, sounds a buzzer, displays a warning, and lowers the boost pressure based on the settings. The warning will be canceled when the boost pressure becomes 5kPa or less.
If the peak memory selection function
– is set to OFF, the peak hold value will not be stored in the internal memory, so the peak hold value will be 0kPa when the ignition is turned off. The peak hold value starts from 0kPa every time you turn on the ignition. When set to ON, the peak hold value will be reset and the maximum boost value will be displayed when the ignition is turned on.
Button information Functions
– are used to operate and display support during settings. If you short press any button other than the top button when the main screen is displayed, the screen will switch to the button information screen. Displays what each button can do. During setup, the function of each button is displayed.
Reviews
There are no reviews yet.