Description
The Mantis Kit for the BMW E8x and E9x is the most relevant angle kit in today’s drift society, keeping cost in mind without sacrificing quality or performance. the FDF kit is the first to utilizing the factory knuckle and its strut, caliper and bearing mounts, while attaching the lower half to the FDF adaptor to get the perfect geometry, adjustment and bump stops.
-Angle, 70 degrees depending on your wheel setup and length of control arms
-Tie-rods, Outer tie-rods included, these fasten to the stock inner tie-rods
-Ackerman, adjustable Ackerman options from Positive – zero – negative
-Roll Center, optimized handling by adding 40mm of roll center correction
-Bump steer, perfected bump steer for drifting
-Caster, modifications made to the displaced caster amount giving a good self-steer feel for the driver and maximizing the performance for drifting
-Camber, optimized camber ranging from -3 to -6
-Track Width, 50-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable
-Weight Reduction, compact drop knuckle design makes for a lightweight and strong design, 7075 aluminum used where possible which provides steel like strength at 40% weight reduction.
Reviews
There are no reviews yet.