Description
The Mega Mantis Kit for the Subaru Impreza 2008-2014 fits all impreza and wrx models (sti has not been test fitted)
-Angle, 70 degrees depending on your wheel setup and length of control arms
-Tie-rods, Outer tie-rods included, these fasten to the stock inner tie-rods
-Ackerman, adjustable Ackerman options from Positive – zero – negative
-Roll Center, optimized handling by adding 45mm of roll center correction
-Bump steer, perfected bump steer for drifting
-Caster, modifications made to the displaced caster amount giving a good self-steer feel for the driver and maximizing the performance for drifting
-Camber, optimized camber ranging from -3 to -6
-Track Width, 25-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly Heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable
-Weight Reduction, compact drop knuckle design makes for a lightweight and strong design made from high strength alloy steel, 7075 aluminum used where possible which provides steel-like strength at 40% weight reduction.
-The Kit includes everything needed to install, ABS sensors cannot be used on this kit, and ABS is not recommended for drifting, this kit is for offroad use only,
– You must use either an FRS/BRZ wheel bearing or you must cut the axle stubs and leave them installed in the OEM AWD bearing.
Reviews
There are no reviews yet.