Description
This kit is to fit Turbo oil Line/Fitting for 1JZ/2JZ Twin Turbo to Single Turbo Conversion.
Factory 1JZ or 2JZ-GTE is twin turbo, Many 1JZ or 2JZ-GTE Single Turbo Conversions Need to change the oil line setup and this kit is exactly what it is needed for Single turbo application.
THIS KIT COMES WITH:
– 1x AN10 Aluminum Oil drain return Flange that bolts to the Block
– 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2″) works for many turbos.
– 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5″) works for many turbos.
– 1x AN4 Aluminum Oil Feed Flange that bolts to the Block
(one of the 2 Factory Twin Turbo oil feeds, supplys oil to Turbo)
– 1x Cap Bolt that bolts to the Block
(seals one of the 2 Factory Twin Turbo oil feeds)
– 1x AN10 Braided Oil drain return Line
– 1x AN4 Braided Oil Feed Line. Female AN4 on both ends. with 90 Degree Elbow Connector
– 1 x AN10 Straight Fitting
– 1 x AN10 90 Degree Fitting
Reviews
There are no reviews yet.