Wiring Specialties 1JZ Non -VVTI Ignitor Connector

Description

1JZGTE Non -VVTI Ignitor Connector

Connector is available as:

• Pigtail – Fully assembled with 3 inches of wire. Select this if you want to attach bare wire to bare wire.
• Housing – Only the plastic housing parts. Select this if you want to swap over the pinned wires from a damaged housing to a new housing.
• Parts – Not assembled, comes with housing, crimp-on wire terminals and wire seals.  Select this if you want to crimp new pins on and then assemble the connector.